Special Order Laminate

Pending the size of your total countertop, and number of pieces, your order could come in more than one box. Before you leave your local Menards for pick up, local plant for pick up, or if you have your countertop delivered, you will want to make sure all pieces are counted for.

Along with your countertop piece(s), the following installation items will be included:

Installation Instructions
Follow these for all the steps on installing your countertop. Click here to access your laminate installation guide. Click here for access to our laminate installation videos.

Build-Up Strips
These will be installed on top of the cabinets your countertop will go on. THe build-up strips are used to secure your countertop down to keep it in place. They are critical, as they provide proper height location for installing your countertop, and without could cause the cabinets to not function below.

Shims
These can be used to level your countertop due to uneven floors or cabinets.

1-1/4" Screws
These screws will be used to secure your countertop to the build-up strips.

Color Match Caulk
This is used to seal any areas where loose backsplash meets the countertop or where the countertop meets the wall.

If your countertop layout features a seam or a dishwasher in the design, the following will be included in your installation kit.

Color Match Seam Fill
This will only be included if your order has a countertop seam in it. This can be found if there is a corner, or where two pieces need to butt up together.

Fasteners & Glue
This will only be included if your order has a countertop seam in it. Based on your selection of faster type, it will include Dual Action Fasteners with and Allen wrench or Miter Bolts and Biscuits.

Moisture Barrier Tape
This will only be included if you have a dishwasher in your order.

There are some additional tools and items that will be helpful to have on site during your laminate countertop install as well. These include: a hammer, marking utensil, tape measure, screw gun, belt sander (if any on-site scribing needs to happen), Philips head screw driver, square drive, jig saw utility knife (if any cut outs need to happen), and a 7/16" wrench (if using miter bolts).

Special Order Quartz

Your countertop order is going to come on an A-frame pallet. Pending the size and the number of pieces your countertop order requires, you could have multiple A-frames. Before you leave your local Menards for pick up, local plant for pick up, or if you have your countertop delivered, you will want to make sure all pieces are counted for.

Along with your countertop piece(s), the following installation items will be included:

Installation Instructions
Follow these for all the steps on intalling your countertops. Click here to access the included quartz installation guide. Click here for access to our quartz installation videos.

Shims
These can be used to level your countertop due to uneven floors or cabinets.

Color Match Silicone
This is to be used at the seam that is created where the backsplash meets the countertop. It is also the be used if your countertop has an seams where two pieces meet.

Spray Mist
This spray mist will be your best friend! Use this before applying the color match silicone. It will create a barrier to make cleaning up the excess silicone a breeze.

If your countertop layout features a seam, sink or a dishwasher in the design, the following will be included in your installation kit.

Integra Seam Adhesive
This is used where you have any seam in the countertop.

Undermount Clips
This is used when there is an undermount sink used in the countertop design.

Dishwasher Clips
This is used when there is a dishwasher in the countertop design.

Epoxy
This is what will be used to secure the undermount clips and the dishwasher clips to the underside of the countertop.

There are some additional tools and items that will be helpful to have on site during your quartz countertop install as well. These include: clear silicone and a caulk gun, pencil or fine-tipped marker, hot melt glue gun, tape measure, level, razor blades, denatured alcohol and scrap 2x4 lumber.

The reason for needing scrap lumber is for specific areas of your countertop install where there isn't a cabinet supporting the top from the underside. Areas where this is common is around the dishwasher, on specific sink cabinets, like an apron sink, or with some corner cabinet layouts.

Special Order Solid Surface Countertops

Pending the size of your total countertop, and number of pieces, your order could come in more than one box. Before you leave your local Menards for pick up, local plant for pick up, or if you have your countertop delivered, you will want to make sure all pieces are counted for.

Along with your countertop piece(s), the following installation items will be included:

Installation Instructions
Follow these for all the steps on installing your countertops. Click here to access the included solid surface installation guide. Click here to acess our video library of solid surface installation videos.

Shims
These can be used to level your countertop due to uneven floors or cabinets.

Color Match Silicone
This is to be used at the seam that is created where the backsplash meets the countertop. It is also to be used if your countertop has any seams where two pieces meet.

Spray Mist
This spray will be your best friend! Use this before applying the color match silicone. It will create a barrier to make cleaning up the excess silicone a breeze.

Finish Pad
This is used to buff out your solid surface if any scraches appear overtime.

If your countertop layout features a seam, sink or a dishwasher in the design, the following will be included in your installation kit.

Miter Bolts & Biscuits
This will only be included if your order has a countertop seam in it.

Undermount Clips
This is used when there is an undermount sink used in the countertop design.

Epoxy
This is what will be used to secure the undermount clips and dishwasher clips to the underside of the countertop.

There are some additional tools and items that will be helpful to have on site during your solid surface countertop installation as well. These include: clear silicone and caulk gun, pencil or fine-tipped marker, drill & 1-3/8" hole saw, hot melt glue gun, tape measure, level, 7/16" wrench (for miter bolts), denatured alcohol, and a belt sander (if any on-site scribing needs to happen).